usb ports not working windows 10
Windows 10

Simple Ways To Fix USB Ports Not Working Windows 10

Upgrading your computer to Windows 10, and now you have realized your usb ports not working windows 10. Have you spent quite a lot of time solving it? Do not worry because this problem commonly happens to most users. It makes no difference which types of USB you connect to; your computer will not detect it. 

Your computer or laptop can not recognize your USB for a variety of reasons. It’s possible that your device is broken or that there’s a problem with the port. Therefore, we will have several solutions to tackle it. First, let’s try the most simple method: 

Methods For Solving Usb Ports Not Working Windows 10 Problem

1. Remove Battery And Charger

The power supply may occasionally fail to give power to USB ports. USB ports may become unusable as a result of this. To resolve usb not working windows 10, use this procedure.

  • Step 1: Remove the laptop’s charger and power supply.
  • Step 2: Restart your computer.
  • Step 3: Connect the USB device to the computer again.
  • Step 4: Connect the laptop’s charger and power supply.

You should remove the battery and press the power button for 30 seconds or more to cure the problem.

Your capacitors will be entirely discharged as a result of this action. We also suggest leaving your laptop switched off overnight without a battery to allow capacitors to fully drain.

If you tried all these four steps, but your computer would not detect your USB. Then, following those below solutions:

2. Enable Usb Ports

If the usb port stopped working windows 10, including front usb ports not working windows 10, you might forget to enable them. Making sure that you follow these steps to help your computer reset usb ports windows 10

  • Step 1: Use Device Manager to enable USB ports.
  • Step 2: To display a list of USB ports on the computer, click “Universal Serial Bus controllers.”
  • Step 3: Right-click each USB port and select “Enable.” If this does not re-enable the USB ports, right-click them again and choose “Uninstall.”
  • Step 4: Start the computer up again.

Have your computer still not recognized your USB after these steps? Please calm down and figure out the appropriate solution by completing this article. 

3. Examine The Power Management Options

When you are not using USB controllers, Windows 10 tries to conserve energy by turning them off. Only when they are necessary for use does it turn them on. However, this power-saving method does not always perform as planned, and the computer fails to turn on USB controllers. As a result, windows 10 usb not working. 

This could be your problem as well. Many people have found this strategy to be effective. To perform this procedure, simply follow the procedures outlined below.

  • Step 1: Select Device Manager with a right-click on the Start menu button.
usb ports not working windows 10
  • Step 2: Enlarge Universal Serial Bus controllers.
usb ports not working windows 10

Step 3: Locate the initial USB Root Hub. It could be simply one in some computers. Select Properties from the context menu by right-clicking on it.

usb ports not working windows 10

Step 4: Select the Power Management option. Unmark the box next to it. To save energy, allow the computer to turn off this gadget. Click the OK button.

usb ports not working windows 10

Step 5: For other USB Root Hub devices under Universal Serial Bus controllers, do Steps 3 and 4 again.

This method may resolve the issue. Connect your USB device to the USB port on your computer and see if it is recognized. If that doesn’t work, move on to the next step.

4. Remove Drivers 

Sometimes, usb drivers not working, so we try to address the problem by removing the drivers for Universal Serial Bus controllers in this approach. After restarting the computer, Windows will automatically reinstall the drivers. To perform this procedure, follow the steps below.

Step 1: Select Device Manager with a right-click on the Start menu button.

usb ports not working windows 10

Step 2: Enlarge Universal Bus Controllers. Here, select Uninstall device by right-clicking on the USB Root Hub.

usb ports not working windows 10

Step 3: Repeat Steps 1–3 for each USB Root Hub that remains.

Step 4: Shut down and restart your computer.

After restarting Windows, the USB Root Hubs will be recognized as a new device and its drivers will be installed automatically. This should be effective. Connect your USB device and verify that it functions properly. If that doesn’t work, move on to the next step.

5. Update Drivers 

If reinstalling the drivers didn’t work, you might try updating them. We’ll use this way to update all of the USB Root Hubs. To perform this procedure, follow the steps below.

Step 1: Select Device Manager from the Start menu by right-clicking on it.

usb ports not working windows 10

Step 2: Expand Universal Bus Controllers. By right-clicking on the USB Root Hub, select the Update driver.

usb ports not working windows 10

Step 3: Next, select Automatically search for updated driver software. On your computer, this will download and install the latest USB Root Hub drivers.

Step 4: Repeat steps 2–4 for the remaining USB Root Hub.

Step 5: Shut down and restart your computer.

Connect the USB device to your computer and see if it is recognized. If you still can’t get your USB device to connect, try the next technique.

6. Turn Off Fast Startup

Because of the new rapid starting feature, Windows 10 starts up incredibly rapidly. However, due to a lack of time, the computer may fail to recognize some devices while starting. This could have been the source of the problem. 

We’ll disable fast startup in this method and see if that addresses the problem. To perform this procedure, follow the steps below.

Step 1: Select Power Options by right-clicking on the Start menu button.

usb ports not working windows 10

Step 2: Select Additional power options from the Related Settings.

usb ports not working windows 10

Step 3: On the left side of the window, select Choose what the power button performs from the drop-down menu.

usb ports not working windows 10

Step 4: Select Change settings that are presently unavailable from the drop-down menu. This will allow you to modify the shutdown options.

usb ports not working windows 10

Step 5: Uncheck the box next to Turn on fast startup under Shutdown settings. After that, click Save Changes.

usb ports not working windows 10

Step 6: Shut down and restart your computer.

Connect the USB device to a USB port after your computer has restarted and see if it now works. If it still doesn’t work, go back to the Shutdown settings and enable fast startup. This won’t cause a problem and will help your computer wake up faster. After that, proceed to the next step.

7. Disable The USB Selective Suspend Setting On Your Computer.

One of the reasons why usb stopped working windows 10 is you do not disable USB Selective Suspend setting. Now, let’s make the USB Selective Suspend setting work for you. 

Step 1: Select Power Options from the Start menu by right-clicking on the button.

usb ports not working windows 10

Step 2: Select Additional power options from the Related Settings menu.

usb ports not working windows 10

Step 3: Go to your selected plan’s Change plan settings.

Step 4: Choose Change advanced power settings.

Step 5: Locate and expand USB Settings. Change the USB selective suspend setting to Disabled in this window. Now press the OK button.

Check to see if this resolves the issue. If it didn’t, move on to the next step. 

8. Modify Registry

We’ll make a few adjustments to your computer’s registry using this method. Before messing around with the registry, please make a backup of it. 

For the most part, it is especially beneficial for those who have lenovo usb ports not working windows 10. We’ll continue with the procedure after that. To do so, follow the steps below.

Step 1: Select Run from the Start menu by right-clicking on the button.

usb ports not working windows 10

Step 2: Type “regedit” into this box and hit Enter.

usb ports not working windows 10

Backup: To make a registry backup, go to the File drop-down menu and select Export. After that, save the backup file where you want it. Before saving the file, be sure that the Export Range is set to All.

usb ports not working windows 10

Step 3: Click Save after entering the appropriate file name. If something goes wrong with your registry after you’ve modified it, you may simply execute this file to restore it to its prior condition.

usb ports not working windows 10

Step 4: Now you must follow the steps outlined below.

HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Control > Class > {4d36e965-e325-11ce-bfc1-08002be10318}

Step 5: Look for LowerFilter and UpperFilter on the right side. Select Delete from the context menu when you right-click on them. This solution will not help you if your PC does not install any of these. This method can be skipped.

Step 6: Restart your computer after you’ve deleted them.

Check to see if this method addressed the problem for you after the restart. If that doesn’t work, try the next method.

9. Troubleshoot The Problem

We’ll use troubleshooting to try to repair the problem in this approach. Windows will attempt to resolve the issue on its own. To perform this procedure, follow the procedures listed below.

Step 1: Type “Troubleshoot” into Cortana. From the list of options, choose the same.

usb ports not working windows 10

Step 2: Select Hardware and Devices from the drop-down menu.

usb ports not working windows 10

Step 3: Windows will do a check to see if there are any problems. When you have finished, click either Apply Repair Automatically or Apply this Fix, depending on which option appears.

Step 4: Shut down and restart your computer.

This should resolve the issue. If troubleshooting fails to resolve the problem, move on to the next step.

10. Check For And Install Critical Updates

If none of the preceding techniques worked, it’s possible that a critical Windows update is due and that installing it will solve the problem. What is the reason for this?

Because Microsoft provides updates on a regular basis that include remedies for a variety of issues and mistakes, and the solution to your problem may be in one of them. To install crucial pending updates, follow the procedures below.

Step 1: Select Settings from the Start menu by right-clicking on the button.

usb ports not working windows 10

Step 2: Select Update & Security from the drop-down menu.

usb ports not working windows 10

Step 3: Click the Check for Updates button. Download and install any pending updates if you haven’t already.

Step 4: Restart your computer after applying the updates.

Conclusion

Usb ports not working is a common technical problem when you access your computer or laptop. There are a variety of reasons why usb ports not working windows 10. It can delay your work and make you feel so annoyed significantly. 

Understanding your problems, we have listed some techniques for you to apply to make your experience go smoothly. Even if you are not good at technical devices, you are able to use these solutions. That’s it; we hope you found at least some of these solutions useful. If you find it useful, please share our tips for everyone, thanks!

lindawr

I'm Linda. I have 5 years experience in Information Technology. I'm now an writer for itprospt.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top